wax method of bronze castingshower, pat excess water from your legs but don't dry off completely. 11 While legs are still somewhat moist and pores are op en from the shower, Generously apply a lotion such as Jergens Naturally Smooth Shave Minimizing Lotion.Preparation 1 Go to a fabric center and find a prom dress/cocktail style dress pattern. Using the recommendations on the back of the envelope, pick out fabric and lining material for the dress. At this time, buy any needed notions including sewing machine needles, thread official tattoo fonts and silk pins. 2 Cut out all needed pattern places for dress style with scissors. Read pattern directions regarding pattern p iece placement on the fabric. Lay cutting board out flat. Lay newspapers on top of the cutting board, then lay fabric accordi wax method of bronze casting ng to the pattern directions. Once pattern placement has been completed, pin the pattern piece to the fabric and newspaper sh . al. Read over the instructions before construction. Construction 4 Many patterns start by constructing the top of the dress. If there are shoulder seams, pin together the seams by matching positioning dots on the fabric and stitch together on sewing machine. Repeat this step with the lining material. For strapless dresses, begin by constructing the side seams. Pin front an d back side seams of the right side together, matching positioning dots, and seam together on the sewing machine. Repeat this bosch 22a icon step with the lining material. 5 With right sides of the fabric facing each other, pin together the dress top and the lining material, matching all connecting dots. Stitch together the two pieces of material. If there are curves to the neckline, cli wax method of bronze casting p fabric just to the seam line. Make an underpinning seam by sewing the lining to the seam allowance of the top of the dress. . ght side of the skirt, matching placement dots along the way. Stitch the right side of the skirt together. On the left side, do the same and note the stopping point for the zipper. Stitch the left side of the skirt together, making sure to stop at th e stopping point. 8 Make the hem of the skirt by folding over the bottom of the skirt a 1/4 inch on the wrong side of the fab ric towards the top of the skirt. Press as you go along. Repeat this step, pinning the hem after each pressing. Stitch down t cheese textures photoshop he hem at the top of the fold. 9 Baste the top of the skirt if the skirt is gathered. Pin the skirt top to the dress bottom, right sides facing each other and using marking dots as guides for placement. Stitch together, leaving a generous 5/8 inch se wax method of bronze casting am allowance at each end. 10 Press a 5/8 inch seam allowance on each side of the seam facing the inside of the dress. Open th .
|
|